Connecting Rod Set for Renault Clio RS 2,0 Ltr. 16V F7, 144 mm, 4 pieces (K1 037DZ16144)

SKU: 037DZ16144

GTIN: 00193564001672

Category: Tuning

Please ask for availability!

699,00 €

incl. 19% VAT.* ,

Manufacturers:

K1 Technologies

Connecting Rod Set for Renault Clio RS 2,0 Ltr. 16V F7, 144 mm, 4 pieces (K1 037DZ16144)

K1 Technologies Renault F7R Connecting Rod Set, 144.00 mm Length, 21.00 mm Pin, 51.60 mm Journal, 3/8 in. ARP 2000 Bolts, Forged 4340 Steel, H-Beam, Set of 4

Specifications:
- Average Gram Weight: 627 GR
- Bolt Part Number: BT61601-2
- Bolt Diameter: 3/8 IN
- Center To Center Length: 144.00 MM
- Connecting Rod Finish: Shot-peened
- Lightened: No
- Main Bearing Bore Diameter: 51.60 MM
- Main Bearing Width: 24.88 MM
- Material: Forged 4340 Steel
- Mounting Hardware Included: Yes
- Pin End Bore: 21.00 MM
- Rod Quantity: 4
- Rod Type: H-Beam
- Weight Matched Set: Yes
- Wrist Pin Style: Floating

K1 Technologies connecting rods are manufactured with optimized strength and weight characteristics in mind to deliver reliable performance. Forged from 4340 steel, K1 rods featured a shot-peened surface finish which smooths surface blends and reduces potential stress profiles. K1 connecting rods are held to strict quality standards and undergo magnetic particle testing to ensure material properties are free of flaws. Each rod is also subject to bore tolerance compliance, holding them to +/- .0001” after finishing. Additionally, K1 rods are balanced and tested to be within +/- 1 gram per end. A dual-ribbing design on the rod caps of K1 connecting rods helps maximize strength and allows the rod big end to maintain roundness as engine RPMs increase. Full-floating, precision-honed bronze bushings are fixed into the small ends of the rods for low friction and high wear resistance. Fitted with ARP 2000 rod bolts rated at 200,000 psi tensile strength for most applications, K1 connecting rods deliver an industry-leading combination of strength and value.4340 Forged Steel for strength, toughness, and resistance to impact ~ High quality ARP 2000 fasteners included ~ All rods are finished in the USA and held to very tight tolerences Bores finished to +/- .0001 in. and weight to +/- 1 gram per end ~ Shot peened for improved fatigue life ~ Premium bronze wrist pin bushings ~ Designed by in-house engineering team for high-stress racing applications

All parts offered here in the shop are delivered without a vehicle type approval/certificate unless otherwise stated. This means that if the parts are used on public street, the general operating permit may expire. Please write to us if you have any questions about this or discuss this with your vehicle inspector.

Person in charge:
MaxRPM e.K.
Thorsten Schlagwein
Ober dem Tal 4, 54340 Bekond, GERMANY
Electronic contact address: info@MaxRPM.de